LABORATORIES - TESTING |
|
<< Back
(D) INDIVIDUAL TESTS ACCREDITATED TO NABL
(NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES) AS PER ISO/IEC-17025
SCOPE OF ACCREDATATION CHEMICAL TESTING |
SR. NO. |
Group of Products, Materials or Items Tested |
Specific Tests or Types of tests Performed
|
Specification, Standard (Method) or Technique Used
|
|
|
|
|
1 |
PAPER, PAPERBOARD & CORRUGATED FIBRE BOARD |
1.1. ASH CONTENT |
IS : 1060 –1966
(RA -1992), Part 1, CL.11. |
|
|
|
|
|
|
1.2. pH |
IS : 1060 –1966
(RA -1992), Part 1, CL.10. |
|
|
|
|
|
|
1.3. MOISTURE CONTENT |
IS : 1060 –1966
(RA -1992), Part 1, CL.9. |
|
|
|
|
|
|
1.5. WATER SPRAY TEST |
IS 10212 - 1985 |
|
|
|
|
|
|
1.6. COBB TEST |
IS : 1060 –1966
(RA -1992), Part 1, CL.13.2.2.
IS : 4006 – 1985, Part 2,
CL.6 |
|
|
|
|
|
|
1.7. GRAMMAGE |
IS : 1060 –1966
(RA -1992), Part 1, CL.6.2.1. |
|
|
|
|
|
|
1.8. GRAMMAGE |
IS : 7063 – 1976
Part 4. CL.2.1. |
|
|
|
|
2 |
PLASTIC ALLIED MATERIALS |
2.1 MIGRATION TEST (OVERALL)
|
IS 9845 - 1998 |
|
|
|
|
3 |
TIN COTNAINERS |
3.1. TIN COATING |
IS : 1327 – 1988
(RA – 2006), CL.3. |
|
|
|
|
|
|
3.2 LACQUER CURING TEST
|
IS 1992 – 1981, CL.7.1.1.
Appendix-A |
|
|
|
|
|
|
3.3 LACQUER CONTINUITY TEST |
IS : 7182 - 1973 (Reaffirmed 2001) |
|
|
|
|
4 |
PLASTIC FEEDING BOTTLE |
4.1. AGEING RESISTANCE |
IS 14625 – 1999, CL.14. |
|
|
|
|
|
|
4.2 PRODUCT RESISTANCE OF PRINTED CONTAINER
|
IS 2798 – 1998, CL.14
IS : 10840 – 1994, CL.4.7.6. |
|
|
|
|
|
|
4.3 PERMANENCY OF PIGMENT
|
IS : 14625 – 1999, CL.4.4.2. (Annex.-A) |
|
|
|
|
|
|
4.4 CAPACITY OF SCALE |
IS : 14625 – 1999, CL.4.4.2. |
|
|
|
|
5 |
PLASTIC BOTTLE FOR MINERAL WATER |
5.1. POTABILITY TEST |
IS : 15410 – 2003, CL.4.6.6. |
|
|
|
|
|
|
5.2. CAPACITY |
IS : 15410 – 2003,
CL.4.4. |
|
|
|
|
|
|
5.3. E.S.C.R |
IS : 15410 – 2003, CL.4.6.1. / IS 8747 Method I |
|
|
|
|
6 |
BOPP TAPES |
6.1. pH |
IS : 13262 – 1992
CL.5.1.5.1. |
|
| |
SCOPE OF ACCREDATATION - MECHANICAL TESTING
|
SR. NO. |
Group of Products, Materials or Items Tested |
Specific Tests or Types of tests Performed |
Specification, Standard (Method) or Technique Used |
|
|
|
|
1 |
PAPER, PAPER BOARD
AND CORRUGATED
FIBRE BOARD BOXES |
1.1. THICKNESS |
IS : 1060 – 1966 (RA 1992), Part 1,
CL.7 |
|
|
|
|
|
|
1.2. BULK |
IS : 1060 – 1966 (RA 1992), Part 1
CL.8 |
|
|
1.3. BURSTING STRENGTH |
IS : 1060 – 1966
(RA 1992), Part 1 CL.12.5 |
|
|
|
|
|
|
1.4. BURSTING FACTOR |
IS : 1060 – 1966
(RA 1992), Part 1 CL.12.5.4 |
|
|
|
|
|
|
1.5. BURST INDEX |
IS : 1397 (RA 1995)
CL.5.5
IS : 1060 (RA 1992)
Part 1, CL.12.5
|
|
|
1.6. RING CRUSH TEST |
IS : 4006 – 1985
Part 1, CL.11 |
|
|
1.7. FOLDING ENDURANCE |
IS : 1060 – 1966
(RA 1992) Part 1, CL.12.6 |
|
|
1.8 BREAKING LENGTH
|
IS : 1060 – 1966
(RA 1992) Part 1, CL.12.4 |
|
|
|
|
|
|
1.9 TENSILE STRENGTH & ELONGATION |
IS : 1060 – 1966
(RA 1992) Part 1, CL.12.3 |
|
|
|
|
|
|
1.10. TENSILE INDEX |
IS : 1397 (RA 1995)
CL.5.5
IS : 1060 – 1966
(RA 1992) Part 1, CL.12.4 |
|
|
1.11. TEAR INDEX |
IS : 1397 (RA 1995)
CL.5.5
IS : 1060 – 1966
(RA 1992) Part 1, CL.12.5 |
|
|
|
|
|
|
1.12 EDGE CRUSH TEST |
IS : 7063 – 1976
(RA 1992) Part 2, CL.1.1 |
|
|
|
|
|
|
1.13 BLOCKING RESISTANCE |
IS : 4006 – 1985 Part 1, CL.10 |
|
|
|
|
|
|
1.14 FLAT CRUSH TEST |
IS : 4006 – 1985 Part 2, CL.6 |
|
|
|
|
|
|
1.15 TEAR STRENGTH |
IS : 1060 – 1966 Part 1, CL.12.7 |
|
|
|
|
|
|
1.16 TEAR FACTOR |
IS : 1060 – 1966 Part 1, CL.12.7 |
|
|
|
|
|
|
1.17 SMOOTHNESS
|
IS : 9894 – 1998 CL.4.2 |
|
|
|
|
|
|
1.18 POROSITY |
IS : 9894 – 1998 CL.4.2 |
|
|
|
|
|
|
1.19 ABRASION LOSS (SCUFF PROOFNESS) |
IS : 4006 – 1985 Part 1, CL.9
|
|
|
|
|
|
|
1.20 WAX PICK UP NUMBER |
IS : 1060 - 1969
Part 3, CL.8 |
|
|
|
|
|
2
3 |
CORRUGATED FIBRE
BOARD BOXES AND
WOODEN BOXES
PLASTIC & ALLIED MATERIALS |
2.1 INTERNAL EXTERNAL DIMENSION
2.2 STYLE OF BOX
2.3 NO. OF PLY
2.4 TYPE OF FLUTE
2.5 COMPRESSION STRENGTH
2.6 VIBRATION TEST
2.7 INCLINES IMPACT TESTER
2.8 ROLLING TEST
2.9 DROP TEST
2.10 DROP TEST
2.11 STACK LOAD TEST
3.1 THICKNESS
3.2. HEAT SEAL STRENGTH
|
IS- 2771- 1990 part -1
IS : 6481 – 1971
IS : 2771 – 1990
Part 1, (RA 1995)
IS : 2771 – 1990
Part 1, (RA 1995)
IS : 7028 – 1987
Part 6, CL. 6
IS : 7028 – 1988
Part 2
IS : 7028 - 1987
IS : 7028 – 1987
Part 5
IS : 7028 – 1987
Part 4
IS : 7028 – 1973
Part 4
IS : 7028 – 1973
Part 1
IS : 2508 – 1984
Appendix – 4
IS 11805- 1988 |
|
|
3.3. MELT FLOW INDEX |
IS 2530-1963 |
|
|
|
|
|
|
3.4 MODULUS OF ELASTICITY
3.5 TENSILE STRENGTH (BREAKING LOAD) |
IS 2508-1984
IS : 2508 – 1984
Appendix - 4 |
|
|
|
|
|
|
3.6. ELONGATION AT BREAK |
IS 2508 - 1984
Appendix - 4 |
|
|
|
|
|
|
3.7. DART IMPACT TEST |
IS 2508 – 1984
(RA 1991), CL.4.7 |
|
|
3.8. WATER VAPOUR TRANMISSION RATE |
ASTM E - 398 – 2003 |
|
|
|
|
|
|
3.9. GAS (O 2 ) PERMABILITY |
ASTM D 1434 - 1998 |
|
|
3.10 CO-EFFICIENT OF FRICTION (STATIC) |
IS 2508 -1984 |
|
|
3.11 CO-EFFICIENT OF FRICTION (DYNAMIC) |
IS 2508 - 1984 |
|
4 |
BLOW MOULDED PLASTICS CONTAINERS |
4.1 THICKNESS
4.2. HANDLE STRENGTH |
IS : 2798 – 1998
(RA 2001), CL.4.5
IS 6312 - 1994
CL.7.6 |
|
|
|
|
|
|
4.3. LEAK-PROOFNESS TEST
(BY AIR PRESSURE) |
IMDG - CODE 2001
VOL.1 (Part 6)
CL. 6.1.5.4. |
|
|
|
|
|
|
4.4 HYDRAULIC PRESSURE
TEST |
IS : 6312 - 1994
CL. 8.6.1 & 2 |
|
|
|
|
|
|
4.5 INK ADHESION OF
PRINTED CONTAINERS |
IS : 10840 - 1994
CL. 4.7.5 |
|
|
|
|
|
|
4.6. BRIMFUL CAPACITY |
IS : 6312 -1994 , CL.6 |
|
|
|
|
|
|
4.7. CLOSURE LEAKAGE TEST
(KEEPING ON FLOOR) |
IS : 6312 – 1994,
CL. 8.3
Annexure- D |
|
|
4.8. E.S.C.R. |
IS : 8747 – 1977
CL.5 (Method I) |
|
|
4.9 CLOSURE LEAKAGE TEST
(KEEPING ON FLOOR)
4.10 DROP TEST
|
IS : 2798 – 1998,
CL. 6.1, 6.2 & 6.3
IS : 7959 – 1987,
CL. 10.1.1
(Annex A)
IS : 6312 – 1994
CL.8.4.1 |
|
|
|
|
|
|
5 |
HDPE BAGS |
5.1. DENIER |
IS 6192 - 1994 |
|
|
|
5.2. BREAKING LOAD |
IS : 1969 - 1985 |
|
|
|
5.3. MESH |
IS 1963 - 1981 |
|
|
|
5.4. SEAM STRENGTH |
IS 9030 - 1979 |
|
|
|
5.5. NO OF STITCHES OF SEAM |
IS 11652 – 2000, CL.6
Annexure – A
|
|
|
|
5.6. DIMENSION |
IS : 11652 – 2000, CL.6
Annexure-A |
|
|
|
|
|
|
6 |
TIN CONTAINERS |
6.1. HANDLE PULL TEST |
IS 10325 – 2000, CL.5.2. |
|
|
|
6.2. DIMENSION |
IS : 9992 – 1991, CL.4.1
IS : 10325 – 2000,
CL.4.3.1
IS : 10339 – 2000, CL.4.1.1 |
|
|
|
6.3 LEAKAGE TEST
(AIR PRESSURE) |
IS : 9992 – 1991,
CL.8.3.1
IS : 10339 – 2000, CL.5.1
IS : 10325 – 2000, CL.5.1 |
|
|
|
6.4 HYDRAULIC PRESSURE
TEST |
IS : 10325 – 2000, CL.5.3
IS : 10339 – 2000, CL.5.2 |
|
|
|
6.5. HANDLE PULL TEST |
IS : 10339 – 2000, CL.5.3
IS : 9992 – 1991,
CL.8.1.3. |
|
|
|
|
|
|
7 |
PLASTIC CAPS & CLOSURES |
7.1 COMPRESSIBLITY FOR
CORK COMPOSITION
SHEET |
IS 4253 - 1980 (Part 1)
(RA 1999) |
|
|
|
7.2 RECOVERY OF CORK FOR
COMPOSITION SHEET |
IS 4253 - 1980 (part 1)
(RA 1999) |
|
|
|
7.3. TORQUE TEST |
ASTM D 3198 - 1991 |
|
|
|
|
|
|
8 |
BOPP TAPES |
8.1. ADHESION STRENGTH OF
PRESSURE SENSITIVE
ADHESIVE TAPE TO
METAL |
IS 8402 - 1987, CL. 5
(RA 1992) |
|
|
|
|
|
|
|
|
8.2. ADHESION STRENGTH OF
PRESSURE SENSITIVE
TAPE TO SELF |
IS 8402 - 1987, CL. 13
(RA 1992) |
|
|
|
|
|
|
|
|
8.3 ANCHORAGE OF
ADHESIVES
IN PRESSURE SENSTIVE
CELLULOSE TAPES |
IS 8402 - 1987, CL. 7
(RA 1992) |
|
|
|
|
|
|
|
|
8.4. DETERMINATION OF
STABILITY OF PRESSURE
SENSITIVE TAPES |
IS 8402 - 1987, CL. 14
(RA 1992) |
|
9 |
PLASTIC FEEDING BOTTLE FOR MILK |
9.1. DIMENSION
9.2. DROP TEST
|
IS : 14625 – 1999,
Annex.L, CL.4.5.
IS : 14625 – 1999,
Annex.L, CL.4.7.4. |
|
|
|
|
|
|
10 |
METAL DRUM |
10.1 LEAKAGE TEST
(AIR PRESSURE) |
IS : 1783 - 1993
Part 1, CL.9.1. |
|
|
|
10.2 HYDRAULIC PRESSURE
TEST |
IS : 1783 - 1993
Part 1, CL.9.3. |
|
|
|
10.3. DROP TEST |
IS : 1783 - 1993
Part 1, CL.9.2. |
|
|
|
10.4. SEAM WIDTH |
IS : 1783 - 1993
Part 1, CL.9. |
|
|
|
10.5. THICKNESS |
IS : 1783 - 1993
Part 1, CL.10. |
|
|
|
10.6. DIMENSION |
IS : 1783 - 1993
Part 1, CL.5. |
|
|
|
10.7 DIAMETER OF
CLOSURE |
IS : 1783 - 1993
Part 1, CL.7.6. |
|
|
|
|
|
|
11 |
WOODEN PALLET/PLASTIC PALLET |
11.1. DROP TEST |
IS : 6219 – 1989, CL.9.2. |
|
|
|
|
|
|
11.2. STACKING TEST |
IS : 6219 – 1989, CL.8.1. |
|
SCOPE OF ACCREDATATION - PHOTOMETRY TESTING |
| SR. NO. |
Group of Products, Materials or Items Tested |
Specific Tests or Types of tests Performed |
Specification, Standard (Method) or Technique Used |
|
|
|
|
1 |
Paper and Paper Board |
1.1 Brightness |
TAPPI – 452 mm 87 |
|
|
|
|
|
|
1.2 Diffuse Opacity (Paper Backing) |
TAPPI – T – 519 mm 86 |
|
(E) LIST OF APPROVED INDIAN STANDARDS UNDER BIS LABSORATORY RECOGNITION SCHEME |
A. PAPER & PAPER BOARD |
SR.NO. |
STANDARD |
DETAILS |
1 |
1397 |
Kraft Paper Specification Reaffirmed 1995 |
2 |
1551 |
Carbon Paper Typewriter Specification Year 1991 |
3 |
1848 |
Writing and Printing Specification (Third Revision) Reaffirmed 1995 |
4 |
3450 |
Carbon Paper Handwriting Specification Year 1994 Reaffirmed 2000 |
5 |
12766 |
Paper Computer - Specification Year 1997 |
6 |
6956 |
Cover paper specification Year 2001 |
7 |
3413 |
Base Paper for Carbon Paper Specification Year 2004 |
8 |
14490 |
Plain Copier Paper Year 1997 |
B. STEEL / METAL
|
1 |
1783 |
Type - 1 Specification for drum Part - I Year 1993 Reaffirmed 1998 |
2 |
2552 |
Steel Drums (Galvanized & Un-Galvanized) Reaffirmed 1995 |
3 |
3575 |
Specification of Bitumen Drum - Year 1993 (Third Revision) |
4 |
9992 |
Round & Rectangular Tinplate Cans for Liquid Pesticides - Year 1991 ((First Revision) |
5 |
10325 |
Square Tins - 15 Kg./litre for Ghee, Vanaspati, Edible Oils and Bakery Shortening - 2000 (Second Revision) |
C. PLASTIC & ALLIED MATERIALS |
1 |
13262 |
Specification for pressure sensitive adhesive cellulose tapes : Year 1992 Reaffirmed 2003 |
2 |
6312 |
Polyethylene Containers for the Transport of Material - specification Year 1994 Reaffirmed 1999 |
3 |
8069 |
High Density Polyethylene (HDPE) Woven Sacks for Packing Pesticides - Specification (Second Revision) Year 1989 Part (1 & 2 ) Reaffirmed 1997 |
4 |
2508 |
Low Density Polyethylene Specification Year 1984 Reprint Dec 1996 |
D. EXPLOSIVE BOX |
1 |
10212 (Part I) |
General requirements of packages for explosives Part I Commercial High Explosives (First Revision) Year 1986 |
E. PLASTIC FEEDING BOTTLE |
1 |
14625 |
Plastic Feeding Bottle Year 1999 Reaffirmed 2004 |
F. PACKAGED MINERAL WATER |
1 |
15410 |
Containers for packaging of Natural Mineral Water and Packaged Drinking Water Specification Year 2003 |
2 |
15609 |
Specification for polyethylene Flexible pouches for the packaging of Natural Mineral Water and Packaged Drinking Water Reprint August 2005 |
G. JUTE FABRIC |
1 |
1943 |
Textile - A - Twill Jute Bags Year 1995 Reprint 1999 |
2 |
2566 |
Textile - B - Twill Jute Sacking Bags for packing Food Grains |
3 |
7406 |
Specification for laminated jute bags for packing fertilizers Part I Year 1984 1st Reprint - November 1992, Part - II - 1986 |
4 |
7407 (Part - to III) |
Specifications for Jute Tarpaulin Fabric Year 1980 1st Reprint September 1996 |
5 |
9755 |
Packaging of Fertilizers Specification Year 1999 |
|
|
TESTING OF PACKAGING MATERIALS AND PACKAGES
To avail of testing facilities, clients may please note the following procedures being followed strictly to provide services :
Samples
(Clearly 'marked' and 'labelled' ) may be submitted on working days along with written requests (Customer Service Request Form) indicating list of tests and standards to be followed. We will be too happy to undertake other specialized / unique tests not covered in the list at a fee depending on the availability of equipment and the nature or extent of work involved.
Test samples are retained upto 4 weeks only from the date of testing
Charges
Payable in advance in cash or by DD/local cheque in favour of "Indian Institute of Packaging."
Members will be given preference in services. Minimum testing charge : Rs.330/- per sample for one time testing.
Service tax of 8% or as applicable will be added.
Test Report is based on sample(s) submitted, assuming it is representative of the lot / bulk.
Samples are normally conditioned at 27+-2 deg C and 65 +- 2% RH or as stipulated in the relevant standard or as requested by the client.
Reports are issued in duplicate.
Additional copies may be obtained on request @ Rs.200/- upto 5 pages, @ Rs.350/- upto 10 pages and @ Rs.500/- above 10 pages. Charges for forwarding report by fax/courier/speed post will be extra.
For more information contact us. We shall be happy to help ! |
- Customer Service Request Form
- Customer Feedback Form |
| |
<< Back Page
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
www.huntas.com